Mixpac Two-Component Sulzer Mixpac DM2X 200-01-52-01 Manual Dispensing Gun
Sulzer Mixpac Sulzer Mixpac DM2X 200-01-52-01 Manual Dispenser for Epoxy Dispensing
Sulzer Mixpac Two-Component Manual Dispensing Gun
Specifications
- Cartridge Volume: 200 ml
- Cartridge ratio: 1:1, 2:1
- Weight 1.60kg / 3.53lbs
- Length: 324mm / 12.7in
- Maximum Thrust: 5.2 kN
- Thrust ratio: 22:1
- Tool material: Cast Aluminum and Reinforced Nylon
Sulzer Mixpac DMA 59-00-10 Dispenser
Sulzer Mixpac Two-Component Manual Dispensing Gun
Specifications
- Cartridge capacity: 50mL and 75ml nominal
- Cartridge ratio: 1:1 and 2:1 and 10:1
- Designed specifically for AA and AB System Cartridges
- Weight 184g / 0.41lbs
- Length: 109mm / 4.3in
- Tool material: PBT & reinforced nylon
Cartridge Compatibility Table
| Sulzer Mixpac DMA 59-00-10** Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material*** |
| AA 050-01-10-01 | AA | 50 | 1:1 | PP |
| AA 050-01-10-03 | AA | 50 | 1:1 | PP |
| AA 050-01-30-02 | AA | 50 | 1:1 | PA |
| AA 050-02-10-01 | AA | 50 | 2:1 | PP |
| AA 050-02-10-03 | AA | 50 | 2;1 | PP |
| AA 050-02-30-01 | AA | 50 | 2:1 | PA |
| NOTES: | ||||
| * Other cartridge variants are available. Please contact |
||||
| **Using plungers PLA 050-04 and PLA 050-10 will convert the dispenser to 4:1 and 10:1 ratio, respectively. | ||||
| *** PP = polypropylene, PA = Nylon. PBT = polyester | ||||
Sulzer Mixpac DMA 75-00-10 Dispenser
Sulzer Mixpac Two-Component Manual Dispensing Gun
Specifications
- Cartridge capacity: 75ml nominal
- Cartridge ratio: 1:1
- Designed specifically for AA and AB System Cartridges
- Weight 184g / 0.41lbs
- Length: 109mm / 4.3in
- Tool material: PBT & reinforced nylon
Cartridge Compatibility Table
| Sulzer Mixpac DMA 75-00-10** Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material*** |
| AA 050-01-10-01 | AA | 50 | 1:1 | PP |
| AA 050-01-10-03 | AA | 50 | 1:1 | PP |
| AA 050-01-30-02 | AA | 50 | 1:1 | PA |
| AA 050-02-10-01 | AA | 50 | 2:1 | PP |
| AA 050-02-10-03 | AA | 50 | 2;1 | PP |
| AA 050-02-30-01 | AA | 50 | 2:1 | PA |
| AB 050-01-10-04 | AB | 50 | 1:1 | PP |
| AB 050-01-20-01 | AB | 50 | 1:1 | PP |
| AB 050-01-30-02 | AB | 50 | 1:1 | PA |
| AB 050-02-10-01 | AB | 50 | 2:1 | PP |
| AB 050-02-30-02 | AB | 50 | 2;1 | PP |
| AB 050-02-30-03 | AB | 50 | 2:1 | PA |
| NOTES: | ||||
| * Other cartridge variants are available. Please contact |
||||
| **Using plungers PLA 050-04 and PLA 050-10 will convert the dispenser to 4:1 and 10:1 ratio, respectively. | ||||
| *** PP = polypropylene, PA = Nylon. PBT = polyester | ||||
Sulzer Mixpac DMB 50-04-01 Dispenser
Sulzer Mixpac Two-Component Manual Dispensing Gun
Specifications
- Cartridge capacity: 50ml nominal
- Cartridge ratio: 4:1
- Designed specifically for AA and AB System Cartridges
- Weight 184g / 0.41lbs
- Length: 109mm / 4.3in
- Tool material: PBT & reinforced nylon
Cartridge Compatibility Table
| Sulzer Mixpac DMB 50-04-01** Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material*** |
| AA 050-04-10-01 | AA | 50 | 4:1 | PP |
| AA 050-04-10-03 | AA | 50 | 4:1 | PP |
| AA 050-04-30-02 | AA | 50 | 4:1 | PA |
| NOTES: | ||||
| * Other cartridge variants are available. Please contact |
||||
| **Using plungers PLA 050-04 and PLA 050-10 will convert the dispenser to 4:1 and 10:1 ratio, respectively. | ||||
| *** PP = polypropylene, PA = Nylon. PBT = polyester | ||||
Sulzer Mixpac DMB 50-10-01 Dispenser
Sulzer Mixpac Two-Component Manual Dispensing Gun
Specifications
- Cartridge capacity: 50ml nominal
- Cartridge ratio: 10:1
- Designed specifically for AA and AB System Cartridges
- Weight 184g / 0.41lbs
- Length: 109mm / 4.3in
- Tool material: PBT & reinforced nylon
Cartridge Compatibility Table
| Sulzer Mixpac DMB 50-10-01** Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material*** |
| AA 050-10-10-01 | AA | 50 | 1:1 and 2:1 | PP |
| AA 050-10-10-02 | AA | 50 | 1:1 and 2:1 | PP |
| AA 050-10-30-01 | AA | 50 | 1:1 and 2:1 | PA |
| NOTES: | ||||
| * Other cartridge variants are available. Please contact |
||||
| **Using plungers PLA 050-04 and PLA 050-10 will convert the dispenser to 4:1 and 10:1 ratio, respectively. | ||||
| *** PP = polypropylene, PA = Nylon. PBT = polyester | ||||
Brandywine Materials
308 East School Street
Woonsocket, RI 02895
Phone: 401-526-9856
Fax: 401-386-2440
admin@brandywinematerials.com
- Static Mixers
– Sulzer Mixpac, Quadro and Statomix
– Nordson In-Line and Disposable Plastic
- Cartridges – Sulzer Mixpac and Sulzer Quadro Plastic Two-Component, Side-by-Side
- Dispensers – Mixpac, MK and COX Manual, Pneumatic and Battery Dispensers and Applicators
- Cartridges & Syringes – Nordson, for One and Two-Component Adhesives
- Dispensing Systems – Sulzer Mixpac Adhesive
- Adhesives – for Industrial Applications