Mixpac DPD 1500-01 Pneumatic Spray Dispenser
Sulzer Mixpac Two-Component Pneumatic Spray Dispensing Gun
Specifications
- Application: Spray Dispensing of Coatings
- Cartridge capacity: 940ml, 1000ml, 1125ml, 1500ml (Capacity depends on cartridge ratio used)
- Cartridge ratio: 1:1, 2:1, 4:1, 10:1 (tools included for all conversion)
- Designed specifically for Mixcoat F System Cartridges
Cartridge Compatibility Table
| Sulzer Mixcoat DPD 1500-01 |
||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material |
| AF 1500-01-14-01 | AF | 1500 | 1:1 | PP |
| AF 1500-01-30-01 | AF | 1500 | 1:1 | PA |
| AF 1125-02-14-01 | AF | 1125 | 2:1 | PP |
| AF 1125-02-30-01 | AF | 1125 | 2:1 | PA |
| AF 1000-03-14-01 | AF | 1000 | 3:1 | PP |
| AF 1000-03-30-01 | AF | 1000 | 3:1 | PA |
| AF 940-04-14-01 | AF | 940 | 4:1 | PP |
| AF 940-04-30-01 | AF | 940 | 4:1 | PA |
| These piston insertion devices are used for proper insertion, when filling cartridges manually. | ||||
| Piston Insertion Device | ||||
| Volume (ml) | Ratio | Part | ||
| 1500 | 1:1 | PIDQ 1500-01-01 | ||
| 1125 | 2:1 | PIDQ 1125-02-01 | ||
| 1000 | 3:1 | PIDQ 1000-03-01 | ||
| 940 | 4:1 | PIDQ 0940-04-01 | ||
Mixpac Two-Component DP 200-70-10 Pneumatic Dispensing Gun
Sulzer Mixpac DP 200-70-10 Pneumatic Dispenser for Epoxy Dispensing
Sulzer Mixpac Two-Component Pneumatic Dispensing Gun
Specifications
- Cartridge capacity: 200mL (nominal)
- Cartridge ratio: 10:1
- Designed specifically for Mixpac C and F System Cartridges
- Weight 1.66kg / 3.66lbs
- Length: 402mm / 15.8in
- Maximum Thrust: 2.2kN
- Tool material: cast aluminium and reinforced nylon
- Cartridge capacity: 200mL
- Air inlet: G 1/4in
- Max operating pressure: 6.8 ba
Cartridge Compatibility Table
| Sulzer Mixpac DP 200-70-10 Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material**** |
| AC 200-10-10-01 | AC** | 200 | 10:1 | PP |
| AC 200-10-10-04 | AC** | 200 | 10:1 | PP |
| AF 200-10-10-05 | AF*** | 200 | 10:1 | PP |
| AF 200-10-20-05 | AF*** | 200 | 10:1 | PBT |
| NOTES: * Other cartridge variants are available. Please contact ** For AC series cartridge, the "-01" variants come with UM 13-PP, retaining nut for attaching 13mm ID mixers and AC series cartridges "-04" variants come with UM 10-PP, retaining nut for attaching 10mm and smaller ID mixers *** For AF series cartridges "-01 variants come with short legged cap" and AF series cartridges "-05 variants come with long legged cap" **** PP = polypropylene, PA = Nylon. PBT = polyester |
||||
Mixpac Two-Component DP 200-70-04Pneumatic Dispensing Gun
Sulzer Mixpac DP 200-70-04 Pneumatic Dispenser for Epoxy Dispensing
Sulzer Mixpac Two-Component Pneumatic Dispensing Gun
Specifications
- Cartridge capacity: 200mL (nominal)
- Cartridge ratio: 4:1
- Designed specifically for Mixpac C and F System Cartridges
- Weight 1.66kg / 3.66lbs
- Length: 402mm / 15.8in
- Maximum Thrust: 2.2kN
- Tool material: cast aluminium and reinforced nylon
- Cartridge capacity: 200mL
- Air inlet: G 1/4in
- Max operating pressure: 6.8 ba
Cartridge Compatibility Table
| Sulzer Mixpac DP 200-70-04 Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material**** |
| AC 200-04-10-01 | AC** | 200 | 4:1 | PP |
| AC 200-04-10-04 | AC** | 200 | 4:1 | PP |
| AF 200-04-10-01 | AF*** | 200 | 4:1 | PP |
| AF 200-04-20-01 | AF*** | 200 | 4:1 | PBT |
| NOTES: * Other cartridge variants are available. Please contact ** For AC series cartridge, the "-01" variants come with UM 13-PP, retaining nut for attaching 13mm ID mixers and AC series cartridges "-04" variants come with UM 10-PP, retaining nut for attaching 10mm and smaller ID mixers *** For AF series cartridges "-01 variants come with short legged cap" and AF series cartridges "-05 variants come with long legged cap" **** PP = polypropylene, PA = Nylon. PBT = polyester |
||||
Mixpac Two-Component DP 200-70-01 Pneumatic Dispensing Gun
Sulzer Mixpac DP 200-70-01 Pneumatic Dispenser for Epoxy Dispensing
Sulzer Mixpac Two-Component Pneumatic Dispensing Gun
Specifications
- Cartridge capacity: 200mL (nominal)
- Cartridge ratio: 1:1 and 2:1
- Designed specifically for Mixpac C and F System Cartridges
- Weight 1.66kg / 3.66lbs
- Length: 402mm / 15.8in
- Maximum Thrust: 2.2kN
- Tool material: cast aluminium and reinforced nylon
- Cartridge capacity: 200mL
- Air inlet: G 1/4in
- Max operating pressure: 6.8 ba
Cartridge Compatibility Table
| Sulzer Mixpac DP 200-70-01 Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material**** |
| AC 200-01-10-01 | AC** | 200 | 1:1 | PP |
| AC 200-01-30-04 | AC** | 200 | 1:1 | PA |
| AF 200-01-10-05 | AF*** | 200 | 1:1 | PP |
| AF 200-01-30-01 | AF*** | 200 | 1:1 | PA |
| AC 200-02-10-01 | AC** | 200 | 2:1 | PP |
| AC 200-02-10-04 | AC** | 200 | 2:1 | PP |
| AF 200-02-10-01 | AF*** | 200 | 2:1 | PP |
| AF 200-02-30-05 | AF*** | 200 | 2:1 | PA |
| NOTES: * Other cartridge variants are available. Please contact ** For AC series cartridge, the "-01" variants come with UM 13-PP, retaining nut for attaching 13mm ID mixers and AC series cartridges "-04" variants come with UM 10-PP, retaining nut for attaching 10mm and smaller ID mixers *** For AF series cartridges "-01 variants come with short legged cap" and AF series cartridges "-05 variants come with long legged cap" **** PP = polypropylene, PA = Nylon. PBT = polyester |
||||
Mixpac Two-Component DP 400-85-10 Pneumatic Dispensing Gun
Sulzer Mixpac DP 400-85-10 Pneumatic Dispenser for Epoxy Dispensing
Sulzer Mixpac Two-Component Pneumatic Dispensing Gun
Specifications
- Cartridge capacity: 400mL (nominal)
- Cartridge ratio: 10:1
- Designed specifically for Mixpac C and F System Cartridges
- Weight 2.18kg / 4.81lbs
- Length: 402mm / 15.8in
- Maximum Thrust: 3.2kN
- Tool material: cast aluminum and reinforced nylon
- Cartridge capacity: 400mL
- Air inlet: G 1/4in
- Max operating pressure: 6.8 bar
Cartridge Compatibility Table
| Sulzer Mixpac DP 400-85-10 Dispensing Gun | ||||
| Cartridge* | Cartridge Series | Volume (ml) | Ratio | Material**** |
| AF 400-10-10-05 | AF*** | 400 | 10:1 | PP |
| AF 400-10-20-01 | AF*** | 400 | 10:1 | PBT |
| NOTES: * Other cartridge variants are available. Please contact ** For AC series cartridge, the "-01" variants come with UM 13-PP, retaining nut for attaching 13mm ID mixers and AC series cartridges "-04" variants come with UM 10-PP, retaining nut for attaching 10mm and smaller ID mixers *** For AF series cartridges "-01 variants come with short legged cap" and AF series cartridges "-05 variants come with long legged cap" **** PP = polypropylene, PA = Nylon. PBT = polyester |
||||
Brandywine Materials
308 East School Street
Woonsocket, RI 02895
Phone: 401-526-9856
Fax: 401-386-2440
admin@brandywinematerials.com
- Static Mixers
– Sulzer Mixpac, Quadro and Statomix
– Nordson In-Line and Disposable Plastic
- Cartridges – Sulzer Mixpac and Sulzer Quadro Plastic Two-Component, Side-by-Side
- Dispensers – Mixpac, MK and COX Manual, Pneumatic and Battery Dispensers and Applicators
- Cartridges & Syringes – Nordson, for One and Two-Component Adhesives
- Dispensing Systems – Sulzer Mixpac Adhesive
- Adhesives – for Industrial Applications